30# Felt for eaves protection: This heavy duty tar paper (30lbs./100 square feet) is placed along the gutter edge. It is there to protect your eaves from ice and water buildup. We will also put 30# felt in the roof valleys (if you have valleys).
15# Felt between each course: Between each row of cedar shakes is an 18" wide strip of 15# felt paper (15lbs/100 square feet).
15# Felt over entire roof deck: For cedar shingle application 15# felt is laid down over the entire roof and the cedar shingles are nailed down over top.
Brown metal valleys: Our Metal valleys are 24" wide and made from gauge metal which comes prepainted with a brown baked enamel finish that won't rust!
Brown metal flashings: All our flashings are made from the same heavy gauge, prepainted metal as our valleys. Base flashings around brick chimmeys get replaced and our installers check any other flashings on the roof for potential problems. If they spot a potential flashing problem, it is fixed on the spot (no added charge!).
Attic vents: These vents let air circulate into your attic space or between the rafters to remove moisture and heat. They are made from a high impact, soft plastic which is resistant to heat, cold and UV rays. These vents are extremely rugged and will outlast metal vents and most roofing materials.
Plumbing stacks: A flashing which allows breather pipes for your plumbing to pass through the roof. From the ground they appear to be a pipe sticking up through the roof.
Built-in gutters: We replace three major compponents:
1. The gutter liner (a 24" wide EPDM rubber membrane).
2. 2" copper drains (allow water from the gutter to pass through the soffit to the down pipes)/
3. FAcia board metal cap flashing ( adds the finishing touch!).
Other: Gooseneck vents - A special vent on the roof for your range good above your stove.
Types of Shakes
A. 24"x3/4" Handsplit Resawn Shakes
#1 Blue Label, 100% Edge Grain Premium Western Red Cedar Shakes with starter course and custom hip and ridge caps.
Untreated & CCA Treated Available
B. 24" x 1/2" Handsplit Resawn Shakes
#1 Blue Label, 100% Edge Grain Premium Western Red Cedar Shakes with starter course and custom hip and ridge caps.
Untreated & CCA Treated Available
C. 24" x 1/2" Handsplit Natural Tapersplit Shakes
#1 Blue Label, 100% Edge Grain Premium Western Red Cedar Shakes with starter course and custom hip and ridge caps.
Untreated & CCA Treated Available
D. 18" x 3/4" Handsplit Resawn Shakes
#1 Blue Label, 100% Edge Grain Premium Western Red Cedar Shakes with starter course and custom hip and ridge caps.
Untreated & CCA Treated Available
E. 18" x 1/2" Handsplit Resawn Shakes
#1 Blue Label Edge Grain Western Red Cedar Shakes with starter course and custom hip and ridge caps.
Untreated & CCA Treated Available
F. 18" x 5/8" Tapersawn Shakes
#1 Blue Label, 100% Edge Grain Premium Western Red Cedar Shakes with starter course and custom hip and ridge caps.
Untreated & CCA Treated Available
G. 18" x 3/8" Straight Split Shakes
#1 Blue Label, 100% Edge Grain Premium Western Red Cedar Shakes with starter course and custom hip and ridge caps.
Untreated & CCA Treated Available
H. 18" x 3/8 Perfection Shingles
#1 Blue Label, 100% Edge Grain Premium Western Red Cedar Shingles with starter course and custom hip and ridge caps.
Untreated & CCA Treated Available
I. Cedar Conversion to Fiberglass Laminate
Fiberglass Laminated Shingles starter course and custom hip and ridge caps.
|
|
|
| With standard application, Cedar Shakes and Shingles meet the highest wind resistant testing available. Tested and effective against 130 mph hurricane force winds. The natural resilience of Cedar Shakes and Shingles protects against whatever nature throws at it. In the lab or the real world. |
Snow and Hail Available with the highest hail resistance ratings. |
25 year Fiberglass Laminated Shingle
30 year Fiberglass Laminated Shingle
Color
